The 2013 Subaru Outback check engine light and brake light flashing indicates a malfunction in the electronic parking brake system. It is recommended to promptly park in a safe location and contact a Subaru dealer for assistance.
When the check engine light and brake light on your 2013 Subaru Outback start flashing, it can be a cause for concern. These flashing lights indicate a problem with the electronic parking brake system, which should not be ignored. It is crucial to address this issue promptly and ensure your safety on the road.
We will discuss what could be causing the check engine light and brake light to flash, and why it is essential to take immediate action. Additionally, we will provide some insights into the potential consequences of ignoring these warning lights. Let’s dive in and find out more about this concerning issue with your Subaru Outback.
Common Warning Lights
The 2013 Subaru Outback has a check engine light along with a flashing brake light, signaling a potential issue with the brake system or a severe engine misfire. These warning lights require immediate attention to avoid costly repairs and ensure safe driving.
Contacting a Subaru dealer for prompt diagnosis and repair is recommended.
Blinking Brake Light
If you see a red light blinking on and off in your Subaru Outback, it could be a cause for concern. This blinking brake light can indicate a low brake fluid level or a serious issue with the brake’s hydraulic system. It’s important not to ignore this warning, as it could potentially lead to brake failure, which can be both dangerous and costly.
To determine the exact cause of the blinking brake light, it is best to promptly park your vehicle in a safe location and contact your Subaru dealer. They will have the expertise to diagnose the problem and provide the necessary repairs or maintenance to ensure the safety of your vehicle.
Check Engine Light
If you notice the check engine light illuminated on your Subaru Outback, it is essential to address it as soon as possible. A steady check engine light can indicate various issues with your engine, ranging from minor to severe. However, if the check engine light is flashing, it usually indicates a severe engine misfire.
This misfire allows unburned fuel to be dumped into the exhaust system, resulting in a rapid increase in the temperature of the catalytic converter. If left unattended, this can lead to significant damage and expensive repairs. It is crucial to have your vehicle checked by a professional to diagnose the cause of the misfire and prevent further damage to your engine and exhaust system.
Your local Subaru dealer will have the necessary expertise and tools to diagnose and repair the issue causing the check engine light to flash. Don’t delay in getting it checked, as early detection and timely repairs can save you from more extensive and costly repairs in the future.
Remember, it’s always better to be safe than sorry when it comes to warning lights in your vehicle. Ignoring these lights can lead to serious and costly consequences. So, if you see the brake light flashing or the check engine light illuminating, take action immediately to ensure the safety and longevity of your Subaru Outback.
Credit: www.reddit.com
Causes Of Blinking Brake Light
When it comes to the Subaru Outback, a blinking brake light is a cause for concern. It could indicate various issues that need immediate attention. In this section, we will explore the possible causes of a blinking brake light and what they mean for your vehicle’s safety and performance.
Low Brake Fluid
One possible cause of a blinking brake light is low brake fluid. The brake fluid is responsible for creating hydraulic pressure, which allows your vehicle to stop effectively. If the fluid level is low, it can result in reduced braking performance and potentially lead to brake failure.
If you notice a blinking brake light, it is crucial to check your brake fluid level. Here’s a quick guide on how to do it:
- Locate the brake fluid reservoir under the hood of your Subaru Outback.
- Remove the cap and inspect the fluid level.
- If the fluid level is below the recommended level, add brake fluid until it reaches the appropriate mark.
- After adding brake fluid, securely fasten the cap back onto the reservoir.
Regularly checking and maintaining the brake fluid level can help prevent brake-related issues and ensure your safety on the road.
Hydraulic System Issue
Another possible cause of a blinking brake light is a hydraulic system issue. The hydraulic system comprises various components like the brake lines, hoses, and calipers, which work together to apply the brakes when you press the pedal.
If there is a problem within the hydraulic system, it can affect the proper functioning of the brakes and result in a blinking brake light. Some common hydraulic system issues include:
- Leaking brake fluid
- Worn-out brake pads
- Malfunctioning brake calipers
- Collapsed brake hose
- Stuck brake piston
If you suspect a hydraulic system issue, it is essential to have your Subaru Outback inspected by a professional mechanic. They will be able to identify the specific problem and provide the necessary repairs or replacements to ensure your brakes are in optimal condition.
Remember, any issue with your braking system should not be ignored, as it can lead to potential accidents or expensive repairs. If your brake light keeps blinking or you experience any changes in your vehicle’s braking performance, it’s best to contact your Subaru dealer or a certified technician for assistance.
Consequences Of Check Engine Light
The check engine light in your 2013 Subaru Outback is a crucial indicator of potential issues within your vehicle. Ignoring this warning can lead to significant consequences that can compromise the performance and longevity of your car. Understanding the repercussions of a check engine light is essential for maintaining the health and safety of your vehicle.
Engine Misfire
A flashing check engine light in your Subaru Outback may indicate an engine misfire, which can result in unburned fuel being released into the exhaust system. This increases the temperature of the catalytic converter, leading to potential damage that requires expensive repairs.
Catalytic Converter Damage
Unchecked engine issues, signaled by the flashing check engine light, can lead to severe damage to the catalytic converter. The increased temperature caused by unburned fuel can compromise this vital component, necessitating costly replacements and repairs.
Troubleshooting Tips
If your 2013 Subaru Outback has a flashing check engine light and brake light, it could indicate a malfunction in the electronic parking brake system. Park in a safe location and reach out to your Subaru dealer for assistance. Don’t ignore this warning, as it could lead to potentially costly brake failure.
Gas Cap Inspection
If your check engine light and brake light are flashing on your 2013 Subaru Outback, start by inspecting the gas cap. A loose or damaged gas cap can trigger these warning lights. Ensure the gas cap is securely tightened, and check for any visible signs of wear or damage on the cap itself. If the issue persists after tightening the gas cap, move on to the next troubleshooting step.Unplug Self-test Connector
Another step to troubleshoot the flashing lights is to unplug the self-test connector on your Subaru Outback. Locate the connector under the dashboard and unplug it for a few minutes. This action can reset the system and help in clearing any false error codes that may be causing the lights to flash. After unplugging the connector, plug it back in securely and monitor if the lights continue to flash. If the issue persists after trying these troubleshooting tips, it is recommended to seek professional assistance from your Subaru dealer to properly diagnose and address the underlying cause of the flashing lights. Ignoring these warning lights can lead to potential safety hazards and costly repairs in the future.Community Experiences
When facing the perplexing issue of a flashing check engine light and brake light on a 2013 Subaru Outback, the insights and shared experiences of fellow drivers in the community can provide valuable guidance.
Effect Of Wheel Bearing On Abs Sensor
A bad rear wheel bearing can directly impact the functionality of the ABS sensor, leading to the triggering of warning lights on the dashboard. This connection highlights the intricate nature of the vehicle’s systems and the importance of addressing underlying mechanical issues promptly.
Impact Of Loose Gas Cap
An inadequately tightened gas cap can result in the simultaneous flashing of brake and cruise control lights, adding to the array of concerns for drivers. Ensuring the proper securement of the gas cap is a simple yet crucial step to avoid unnecessary warning light activations.
Credit: www.youtube.com
Credit: www.reddit.com
Frequently Asked Questions Of 2013 Subaru Outback Check Engine Light Brake Light Flashing
What Does A Flashing Brake Light Mean On A 2013 Subaru Outback?
When the brake light flashes on a 2013 Subaru Outback, it means there is a malfunction with the electronic parking brake system. Park in a safe place and contact your Subaru dealer immediately.
Why Is The Check Engine Light Blinking On My 2013 Subaru Outback?
The blinking check engine light on your 2013 Subaru Outback may indicate a severe engine misfire, leading to potential catalytic converter damage. It’s essential to address this promptly to avoid costly repairs. Contact your Subaru dealer as soon as possible.
What Does It Mean When The Brake Light Is Blinking?
The brake light blinking indicates a potential issue with brake fluid levels or the hydraulic system. Park safely and contact your SUBARU dealer promptly for assistance.
Why Is My Subaru Check Engine Light Flashing?
When your Subaru check engine light is flashing, it likely signals a severe engine misfire. This can lead to catalytic converter damage, requiring expensive repairs.
Conclusion
If you encounter a flashing brake or check engine light in your 2013 Subaru Outback, it is crucial to address the issue promptly. Whether it’s a faulty gas cap or a serious brake system malfunction, seeking professional assistance from a SUBARU dealer is crucial to prevent potential safety hazards and costly repairs.
Remember to prioritize your safety and the well-being of your vehicle by addressing these warning lights without delay.
- Check Engine Light Goes off After Getting Gas - March 31, 2024
- Check Engine Light Freightliner Cascadia - March 31, 2024
- Check Engine Light Ford Explorer - March 31, 2024
