The check engine light in your 2017 Kia Sorento may be on due to a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, or defective spark plugs. It’s important to address the issue promptly to prevent further damage to your vehicle.
If the light is flashing, it indicates a more serious problem, such as a misfire that can overheat the catalytic converter. It is recommended not to drive the vehicle in this case and to schedule Kia service immediately.
Common Causes Of Check Engine Light
The check engine light in your 2017 Kia Sorento can come on for a variety of reasons. It serves as a warning sign that there might be an issue with your vehicle’s engine or emissions system. It’s important to address the problem as soon as possible to prevent further damage and to ensure your Sorento is running smoothly.
Oxygen Sensor Failure
One common cause of the check engine light is a failing oxygen sensor. This sensor is responsible for monitoring the amount of unburned oxygen in the exhaust system. If the sensor malfunctions or gets damaged, it can give incorrect readings and trigger the check engine light. Fortunately, replacing the oxygen sensor is a relatively simple repair that can be done by your local auto repair shop in Western Washington.
Fuel Injection System Malfunction
Another common cause of the check engine light is a malfunction in the fuel injection system. The fuel injection system is responsible for delivering fuel to the engine in precise amounts. If there is a malfunction or clog in this system, it can result in poor fuel efficiency, rough idling, or even engine misfires. An experienced mechanic can diagnose and repair any issues with your fuel injection system.
Faulty Emissions Control Part
A faulty emissions control part can also trigger the check engine light. The emissions control system is designed to reduce harmful pollutants emitted by the engine. If a component of this system, such as the catalytic converter or EGR valve, becomes faulty or fails, it can lead to increased emissions and trigger the check engine light. A qualified technician can diagnose the issue and replace the faulty part to restore your vehicle’s emissions control.
It’s important to note that the check engine light can also be triggered by other issues such as a faulty head gasket, dirty mass airflow sensor, or defective spark plugs. If your check engine light is flashing, it indicates a more serious problem and you should avoid driving the vehicle. Instead, schedule Kia service immediately to prevent further damage to your engine.
Credit: www.mattblattkiatr.com
Impact Of Check Engine Light
The check engine light is one of the most crucial indicators in your 2017 Kia Sorento, as it alerts you to potential issues with your vehicle’s engine. Ignoring or neglecting the check engine light can lead to serious trouble and costly repairs. It is important to address the underlying problem as soon as possible to avoid further damage.
Serious Trouble
If the check engine light in your Kia Sorento starts flashing, it indicates a more serious problem such as a misfire that can quickly overheat the catalytic converter. The catalytic converter plays a vital role in reducing harmful emissions from your vehicle’s exhaust system. When it overheats, it can lead to complete failure and potentially damage other engine components.
To prevent further damage and expensive repairs, it is crucial to address the issue promptly when the check engine light is flashing. Schedule a service appointment at your local Kia dealership or authorized repair center to diagnose and resolve the underlying problem. They have the expertise and necessary equipment to accurately diagnose the issue and provide the appropriate solution.
Overheating Of Catalytic Converter
As mentioned earlier, a misfire can quickly overheat the catalytic converter when the check engine light is flashing. The catalytic converter operates at high temperatures to convert harmful gases into less harmful substances. However, when a misfire occurs, unburned fuel enters the exhaust system, raising the temperature in the catalytic converter.
If left unaddressed, the overheating of the catalytic converter can lead to complete failure, resulting in reduced engine performance and increased emissions. Replacing a damaged catalytic converter can be expensive, so it is essential to address the misfire and resolve the issue as soon as possible.
When you notice that your check engine light is flashing, make sure to avoid driving your 2017 Kia Sorento and schedule a service appointment immediately. Preventing further damage and costly repairs is key to keeping your vehicle in optimal condition and avoiding potential breakdowns on the road.
Troubleshooting Tips
If the check engine light in your 2017 Kia Sorento comes on, try these troubleshooting tips. First, check for loose gas caps. Also, inspect the oxygen sensor and the fuel injection system for any malfunction, and ensure the spark plugs are in good condition.
If the light is flashing, it indicates a serious problem, so immediate service is necessary.
Resetting The Check Engine Light
If you want to reset the check engine light of your 2017 Kia Sorento, you can try the following steps:
- Turn off your ignition.
- Don some safety glasses and gloves.
- Locate the negative terminal.
- Disconnect the negative terminal from the battery.
- Leave it disconnected for about 15 minutes.
- Reconnect the cable and tighten it with your wrench.
Moisture In Rod Knock Sensor
One common issue with the check engine light in the 2017 Kia Sorento is moisture getting into the rod knock sensor, which can send false signals. If you suspect this is the problem, you may need to address the moisture issue and potentially replace the affected sensor to resolve the problem.
Credit: m.youtube.com
Concerns With Flashing Check Engine Light
When your Kia Sorento’s check engine light starts flashing, it is crucial to address the issue promptly to prevent potential significant damage and ensure your safety on the road.
Potential Significant Damage
A flashing check engine light can indicate severe issues such as a misfire that may lead to overheating the catalytic converter, causing potential expensive damages to your vehicle.
Immediate Service Needed
If your Kia Sorento’s check engine light is flashing, immediate service is crucial to prevent further damage to the engine and ensure safe driving conditions.
Reasons For Check Engine Light In Kia Sorento
Reasons for Check Engine Light in Kia Sorento
Sensor Failure
One of the common causes of the check engine light in a Kia Sorento is sensor failure.
Emissions System Component Issue
The check engine light can also be triggered by issues with emissions system components.
Loose Gas Cap
Another simple yet frequent reason for the check engine light in a Kia Sorento is a loose gas cap.
Credit: www.kieferkia.com
Frequently Asked Questions For 2017 Kia Sorento Check Engine Light
Why Is My Check Engine Light On In My Kia Sorento?
The check engine light in your Kia Sorento may be on due to various reasons such as a failing oxygen sensor, malfunctioning fuel injection system, damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, or defective spark plugs.
It is important to address the issue immediately, especially if the light is flashing, as it indicates a serious problem that requires immediate service.
What Is The Most Common Reason For The Check Engine Light To Come On?
The most common reason for the check engine light to come on is a failing oxygen sensor. Your local auto repair shop can quickly replace it, restoring your vehicle’s ability to measure unburned oxygen in the exhaust system.
Can I Drive With Kia Check Engine Light On?
Yes, but it’s best to get it checked as soon as possible. A steady light is less serious, but a flashing one means immediate service is needed.
How Do You Reset The Check Engine Light On A 2017 Kia Sorento?
To reset the check engine light on a 2017 Kia Sorento, turn off the ignition, wear safety gear, disconnect the negative terminal, then reconnect and tighten it.
Conclusion
The check engine light in your 2017 Kia Sorento could indicate various issues, from a simple sensor failure to more serious problems like a malfunction in the fuel injection system or damaged oxygen sensor. It’s essential to address this promptly to prevent any further damage to your vehicle.
Remember, your safety on the road matters.
- Check Engine Light Goes off After Getting Gas - March 31, 2024
- Check Engine Light Freightliner Cascadia - March 31, 2024
- Check Engine Light Ford Explorer - March 31, 2024
