The most common reason for the 2013 Ford Explorer Check Engine Light is a failing oxygen sensor. This can be quickly replaced by a local auto repair shop in Western Washington.
If your check engine light is solid yellow or orange, it may indicate lower severity, but it’s still important to make an appointment to diagnose and fix the problem. A flashing check engine light means you should take your car in as soon as possible.
Credit: www.beachmazda.com
Identifying The Issue
When your check engine light comes on in your 2013 Ford Explorer, it’s important to identify the issue quickly to prevent any potential damage to your vehicle. The check engine light is a valuable tool that alerts you to a problem with your vehicle’s engine or emissions system.
Most Common Reasons For Check Engine Light
The check engine light can be triggered by a variety of issues. Here are some of the most common reasons why your check engine light may come on:
- Dirty Mass Airflow Sensor
- Faulty Head Gasket
- Malfunction with the Fuel Injection System
- Defective Spark Plugs
- Malfunctioning Oxygen Sensor
- Faulty Emissions Control Part
It’s important to note that these are just a few examples, and there could be other reasons for your check engine light to illuminate. To accurately diagnose the issue, it’s recommended to bring your vehicle to a qualified mechanic who can perform a diagnostic scan.
Severity Of Check Engine Light
The severity of the check engine light can vary based on the make and model of your vehicle. In most cases, a solid yellow or orange check engine light indicates a lower severity issue. While it may not immediately affect the performance of your vehicle, it’s still important to address the problem as soon as possible to prevent further damage.
On the other hand, a flashing check engine light is a more severe indication that there is a serious problem with your vehicle. In this case, it’s crucial to take your car to a mechanic as soon as possible to avoid potential engine damage or breakdown.
Remember, the check engine light is there to help you identify and resolve issues with your vehicle. Ignoring the light or delaying repairs can lead to more significant problems down the line. By bringing your 2013 Ford Explorer to a qualified mechanic for diagnosis and repair, you can ensure that your vehicle continues to run smoothly and efficiently.
Credit: www.westlieford.com
Troubleshooting Tips
When the check engine light comes on, it can be a cause for concern. However, don’t panic just yet. There are several steps you can take to troubleshoot the issue before taking your 2013 Ford Explorer to the mechanic. In this section, we will discuss the first steps to take when the check engine light comes on and explore some of the possible causes for the light.
First Steps When Check Engine Light Comes On
- Check your gas cap: Start by ensuring that your gas cap is properly tightened. A loose or damaged gas cap can trigger the check engine light.
- Inspect for obvious issues: Take a look under the hood and check for any obvious problems, such as disconnected or damaged wires.
- Check your vehicle’s manual: Consult your vehicle’s manual to see if there are any specific instructions or recommendations for troubleshooting the check engine light.
Possible Causes Of Check Engine Light
The check engine light can be triggered by a variety of issues. Here are some possible causes to consider:
| Possible Causes | |
|---|---|
| Dirty mass airflow sensor | – A dirty mass airflow sensor can affect the air-fuel mixture, leading to engine issues. |
| Faulty head gasket | – A faulty head gasket can cause coolant or oil leaks, resulting in engine malfunctions. |
| Malfunctioning oxygen sensor | – An oxygen sensor that is not functioning properly can affect the fuel mixture, leading to increased emissions and decreased fuel efficiency. |
| Fuel injection system malfunction | – A malfunctioning fuel injection system can affect the engine’s fuel delivery, resulting in performance issues. |
| Faulty emissions control part | – A faulty emissions control part can lead to increased emissions, which can trigger the check engine light. |
| Defective spark plugs | – Worn or defective spark plugs can result in misfires, reduced engine performance, and increased emissions. |
If you are experiencing any of these issues or are unsure of the cause, it is recommended to bring your 2013 Ford Explorer to a qualified mechanic for further inspection and diagnosis. Remember, properly diagnosing and fixing the underlying issue is crucial to ensure the continued performance and safety of your vehicle.
Specific Ford Explorer Issues
Experiencing a 2013 Ford Explorer with a persistent check engine light? Common issues include faulty canister purge solenoid causing lean code. Consider having your mechanic check this out promptly to ensure your vehicle’s optimal performance.
Known Issues With Ford Explorer Check Engine Light
The 2013 Ford Explorer has been known to experience specific issues related to the check engine light. Addressing these problems promptly is crucial for maintaining the vehicle’s performance and safety.
Common Causes Of Check Engine Light
Several common causes lead to the activation of the check engine light in the 2013 Ford Explorer. These include:
- Dirty mass airflow sensor
- Faulty head gasket
- Damaged oxygen sensor
- Malfunction in the fuel injection system
- Faulty emissions control part
- Defective spark plugs
One of the known issues specific to the 2013 Ford Explorer is the faulty canister purge solenoid, which can cause a lean code to set and trigger the check engine light.
It’s essential to address these issues promptly to prevent further damage to the vehicle and ensure its continued smooth operation.
Credit: shop.advanceautoparts.com
Dealing With Check Engine Light
To reset the check engine light on your 2013 Ford Explorer, follow these steps:
- Locate the OBD-II port under the dashboard.
- Use an OBD-II scanner to connect to the port.
- Follow the scanner instructions to reset the light.
- Alternatively, you can disconnect the car battery for a few minutes to reset the light.
When the check engine light comes on, it indicates issues with your vehicle. Here’s how to understand the codes:
- Retrieve the code using an OBD-II scanner.
- Refer to the code manual or online resources to identify the specific issue.
- Contact a professional mechanic if you are unsure about the code or need assistance.
Frequently Asked Questions On 2013 Ford Explorer Check Engine Light
What Is The Most Common Reason For Check Engine Light?
The most common reason for a check engine light is a failing oxygen sensor. This can disrupt the vehicle’s ability to measure unburned oxygen in the exhaust system. Get it replaced at your local repair shop in Western Washington.
What Does The Engine Light Mean On A 2013 Ford Explorer?
The engine light on a 2013 Ford Explorer indicates a problem with the vehicle’s engine or emissions system. It is important to have the issue diagnosed and fixed by a professional as soon as possible to prevent further damage or costly repairs.
Is A Solid Check Engine Light Serious?
A solid check engine light may indicate lower severity depending on your car’s make and model. However, it is still important to make an appointment to diagnose and fix the problem. A flashing check engine light should be addressed immediately.
What Is The First Thing To Check When The Check Engine Light Comes On?
The first thing to check is your gas cap. Ensure it is tightly sealed to prevent evaporation.
Conclusion
If you notice the check engine light on your Ford Explorer, don’t panic. It might be a minor issue like a loose gas cap or a faulty oxygen sensor. However, it’s crucial to have it diagnosed and fixed promptly to prevent any potential damage to your vehicle.
Visit your local auto repair shop for a thorough inspection and peace of mind.
- Check Engine Light Goes off After Getting Gas - March 31, 2024
- Check Engine Light Freightliner Cascadia - March 31, 2024
- Check Engine Light Ford Explorer - March 31, 2024
