The 2018 Jeep Grand Cherokee check engine light could be due to various reasons such as a faulty emissions control part, a malfunction in the fuel injection system, a damaged oxygen sensor, or dirty mass airflow sensor. It is important to have the vehicle diagnosed and repaired to prevent further complications.
A solid yellow or orange check engine light may indicate a lower severity, while a flashing check engine light should be addressed immediately. Avoid driving the car with a flashing check engine light and schedule a Jeep service to resolve the issue.
Credit: www.scrantondodgechryslerjeep.net
Troubleshooting 2018 Jeep Grand Cherokee Check Engine Light
If you’re dealing with the 2018 Jeep Grand Cherokee check engine light, it’s essential to troubleshoot the issue promptly. Common reasons may include a faulty emissions control part, fuel injection system malfunction, or damaged oxygen sensor. It’s crucial to address the problem promptly to prevent further issues.
Understanding The Check Engine Light
The check engine light in your 2018 Jeep Grand Cherokee is an important warning indicator that alerts you to potential issues with your vehicle’s engine. When this light comes on, it indicates that the engine control unit (ECU) has detected a problem and stored a diagnostic trouble code (DTC) related to the issue. It is important to note that the check engine light can illuminate for a variety of reasons, ranging from minor issues to more serious problems that require immediate attention.
Common Reasons For The Check Engine Light
There are several common reasons why the check engine light may illuminate in your 2018 Jeep Grand Cherokee. These include:
- Faulty emissions control part
- Malfunction with the fuel injection system
- Faulty head gasket
- Dirty mass airflow sensor
- Faulty spark plugs
In addition to these common reasons, other potential causes for the check engine light to come on include a damaged oxygen sensor or a loose or damaged gas cap. It is important to address these issues promptly to prevent further damage to your vehicle and ensure optimal performance.
| Light Color | Severity | Action |
|---|---|---|
| Solid yellow or orange | Lower severity | Schedule an appointment to diagnose and fix the problem |
| Flashing | High severity | Stop driving immediately and seek professional assistance |
It’s important to note that the severity of the check engine light can vary based on your car’s make and model. If you’re unsure about the seriousness of the issue, it’s always best to err on the side of caution and consult with a professional mechanic or schedule a service appointment for an accurate diagnosis.
In conclusion, when the check engine light illuminates in your 2018 Jeep Grand Cherokee, it is crucial to address the issue promptly to avoid further damage and ensure your vehicle’s optimal performance. By understanding the common reasons for the check engine light, you can take appropriate troubleshooting steps and seek professional assistance when needed.
Diagnosing The Check Engine Light
If you’re dealing with a check engine light on your 2018 Jeep Grand Cherokee, it’s important to diagnose the issue promptly. Some common causes include faulty emissions control parts, fuel injection system malfunctions, and damaged oxygen sensors. To ensure the problem is properly resolved, schedule a diagnostic appointment with a qualified technician.
Self Diagnostic Mode
To diagnose the check engine light on your 2018 Jeep Grand Cherokee, you can put your vehicle into self-diagnostic mode. This mode allows you to retrieve any stored error codes that may be causing the check engine light to illuminate. Here’s how you can do it:
- Start by turning off the engine and closing all the doors.
- Insert your key into the ignition and turn it to the “On” position without starting the engine.
- Quickly press the accelerator pedal all the way down and release it three times within 10 seconds.
- Wait for the check engine light to start flashing. Each flash represents a numeric value, indicating a specific error code.
- Refer to your vehicle’s manual or search online for the meaning of the error codes displayed.
Checking The Gas Cap
One common reason for the check engine light to come on is a loose or improperly sealed gas cap. It’s a simple issue that you can easily fix yourself. Follow these steps to check the gas cap:
- Turn off the engine and make sure the car is parked in a safe location.
- Locate the gas cap on your Jeep Grand Cherokee.
- Remove the gas cap and inspect it for any visible damage or debris.
- Clean the gas cap using a soft cloth or paper towel.
- Place the gas cap back on and make sure it is tightened properly until you hear a “click”.
Diagnosing An Evaporative Emissions Leak
If the gas cap is not the issue, then it’s possible that there is a leak in the evaporative emissions system. This system is responsible for capturing and controlling fuel vapors to prevent them from escaping into the atmosphere. Here’s how you can diagnose an evaporative emissions leak:
- Inspect the hoses and connectors in the evaporative emissions system for any signs of damage or disconnection.
- Check the fuel filler neck for any rust, corrosion, or loose parts.
- Use a smoke machine to detect leaks by introducing smoke into the system and looking for any escaping smoke.
- If you are unable to find any visible leaks, it’s recommended to take your vehicle to a certified mechanic for further diagnosis.
Other Diagnostic Techniques
If the above methods did not identify the cause of the check engine light, there are other diagnostic techniques that can be used. These include:
- Using an OBD-II scanner to read the error codes stored in the vehicle’s computer system.
- Performing a visual inspection of the engine and its components for any obvious issues.
- Checking the electrical connections and wiring harnesses for any loose or damaged connections.
- Testing the various sensors in the engine, such as the oxygen sensor or mass airflow sensor, to ensure they are functioning correctly.
By following these diagnostic techniques, you can effectively identify and address the cause of the check engine light on your 2018 Jeep Grand Cherokee. Remember, if you are unsure or unable to diagnose the issue yourself, it’s always best to consult a professional mechanic for assistance.
Clearing The Check Engine Light
A check engine light in your 2018 Jeep Grand Cherokee can be alarming, but it is often an indication of a minor issue that can be easily resolved. However, it’s essential to diagnose the problem first before resetting the light. Below, we’ll discuss the steps involved in scanning for codes and resetting the check engine light.
Scanning For Codes
When diagnosing the cause of the check engine light, it’s important to start by scanning for diagnostic trouble codes (DTCs) using an OBD-II scanner. These codes provide specific information about the issues in the vehicle’s systems. Once the codes are retrieved, you can cross-reference them with a reliable database or seek professional advice to determine the appropriate course of action.
Resetting The Check Engine Light
To reset the check engine light in your 2018 Jeep Grand Cherokee, you can follow these simple steps:
- Locate the vehicle’s OBD-II port, usually found below the dashboard.
- Insert the OBD-II scanner and follow the device’s instructions to clear the DTCs.
- After resetting the codes, the check engine light should turn off. Keep in mind that if the underlying issue is not resolved, the light may reappear.
Credit: www.duboiscountytire.com
Severity Of The Check Engine Light
How serious is a solid check engine light? A solid yellow or orange light may indicate lower severity based on the make and model of your car. It’s a sign to make an appointment to diagnose the issue. A flashing check engine light requires immediate attention for your safety.
Interpreting Solid Vs. Flashing Check Engine Light
A solid check engine light suggests a lower severity issue, while a flashing light means urgent attention is needed to prevent further damage.
Guidelines For Driving With A Check Engine Light On
- Avoid long drives: Limit long journeys with the check engine light on.
- Monitor symptoms: If you notice unusual sounds or performance issues, it’s best to get it checked immediately.
- Regular maintenance: Ensure regular servicing to prevent major breakdowns.
Seeking Professional Help
If your check engine light is flashing, it’s crucial to schedule Jeep service immediately to avoid further damage to your vehicle.
Costs for diagnosing a check engine light issue can vary based on the complexity of the problem. It’s recommended to contact a professional for an accurate estimate.
When your check engine light is on, don’t delay Jeep service for flashing lights. Diagnosis costs for check engine light issues can vary, so it’s best to contact professionals for an estimate.
Credit: m.youtube.com
Frequently Asked Questions For 2018 Jeep Grand Cherokee Check Engine Light
Why Would Check Engine Light Come On In A 2018 Jeep Grand Cherokee?
The check engine light in a 2018 Jeep Grand Cherokee can come on due to various reasons, including a faulty emissions control part, a malfunction with the fuel injection system, a damaged oxygen sensor, or dirty mass airflow sensor. It is important to make an appointment to diagnose and fix the problem.
Avoid driving the car if the check engine light is flashing.
How Serious Is A Solid Check Engine Light?
A solid check engine light should be taken seriously. It indicates a problem that needs to be diagnosed and fixed. A flashing light means you should stop driving and seek immediate service. Ignoring the check engine light could worsen the issue and lead to costly repairs.
What Is The Most Common Reason For Check Engine Light?
A failing oxygen sensor is a common reason for the check engine light to come on. Other reasons include faulty emissions parts and fuel injection issues.
Can I Drive My Jeep With The Check Engine Light On?
Yes, you shouldn’t drive a Jeep with a flashing check engine light. Schedule service immediately.
Conclusion
Understanding the potential causes and addressing a check engine light in your 2018 Jeep Grand Cherokee is essential for maintaining the vehicle’s performance. Whether it’s a simple fix or a more complex issue, prompt diagnosis and action are crucial to prevent further complications.
Seek professional assistance to resolve any concerns and keep your Jeep running smoothly.
- Check Engine Light Goes off After Getting Gas - March 31, 2024
- Check Engine Light Freightliner Cascadia - March 31, 2024
- Check Engine Light Ford Explorer - March 31, 2024
