2018 Jeep Grand Cherokee Check Engine Light Reset: Quick Steps

To reset the check engine light on a 2018 Jeep Grand Cherokee, get the code reading and diagnosis done to address the underlying issue. The check engine light will typically turn off on its own once the problem or code that triggered it has been resolved.

Restarting the car three times can also be an effective way to reset the check engine light without disconnecting the battery. By turning the ignition on and off three times in a row, the check engine light should reset. Remember to ensure the vehicle is off and open the hood before attempting any reset.

Credit: www.breedendodge.net

Importance Of Check Engine Light Reset

Resetting the check engine light on a 2018 Jeep Grand Cherokee is crucial for identifying and addressing underlying issues. By resetting the light, potential problems such as malfunctions in the vehicle’s engine, transmission, or exhaust system can be rectified, promoting optimal vehicle performance and safety.

Regular reset of the check engine light ensures early detection and troubleshooting of any arising issues, preventing costly repairs in the long run.

Why It’s Important

Resetting the check engine light on your 2018 Jeep Grand Cherokee is a crucial step when it comes to vehicle maintenance. The check engine light serves as a valuable indicator that alerts you to potential issues with your vehicle’s performance. Ignoring this warning can lead to serious consequences, such as further damage to your vehicle or even a breakdown on the road. Therefore, it is essential to understand the importance of resetting the check engine light and taking appropriate action to address any underlying problems.

Effects Of Ignoring

If you ignore the check engine light on your Jeep Grand Cherokee, you run the risk of exacerbating the issue at hand. The check engine light can indicate a wide range of problems, ranging from minor issues like a loose gas cap to more severe problems like a malfunctioning catalytic converter or faulty oxygen sensors. By neglecting to address these issues promptly, you may experience reduced fuel efficiency, engine misfires, or even complete engine failure. Additionally, ignoring the check engine light can lead to higher repair costs down the line as the underlying problem worsens over time.

Methods For Check Engine Light Reset

The check engine light in your 2018 Jeep Grand Cherokee can be reset using two different methods. You can choose to reset it yourself using the DIY method, or you can opt for a professional service. Let’s explore each option in detail:

Diy Method

If you’re a hands-on person and want to save some money, resetting the check engine light on your 2018 Jeep Grand Cherokee yourself is a convenient option. Here’s how you can do it:

1. Ensure your vehicle is parked in a safe location and the engine is turned off.
2. Locate the battery and find the negative terminal.
3. Use a wrench or socket to loosen the bolt on the negative terminal and disconnect the negative cable.
4. Leave the cable disconnected for about 15 minutes to allow the computer to reset.
5. Reconnect the negative cable to the battery and tighten the bolt.
6. Start your engine and check if the check engine light has been successfully reset. If it hasn’t, you may need to repeat the process.

Remember, this method only resets the check engine light and does not fix any underlying issues that may have caused it. If the light comes back on after resetting, it’s recommended to have your vehicle diagnosed by a professional.

Professional Service

If you’re not comfortable performing the DIY method or if the check engine light continues to come on after resetting it, it’s best to seek professional help. A trained technician at a certified service center will have the necessary tools and knowledge to diagnose and fix the issue causing the check engine light to illuminate.

When choosing a professional service, make sure to research and select a reputable service center that specializes in Jeep vehicles. They will use specialized diagnostic tools to read the trouble codes stored in your vehicle’s computer and provide an accurate diagnosis. Once the issue is resolved, they will reset the check engine light and ensure that it stays off.

Remember, ignoring a persistent check engine light can lead to further damage to your vehicle and potentially costly repairs. It’s important to address any issues indicated by the check engine light promptly.

Diy Methods For Resetting Check Engine Light

When the check engine light in your 2018 Jeep Grand Cherokee comes on, it can be a source of frustration. However, resetting the check engine light is a simple task that can be done with a few DIY methods. Below are some effective ways to reset the check engine light, allowing you to clear any error codes without visiting a mechanic.

Restarting The Car

An easy and straightforward method to reset the check engine light is by restarting the car. Follow these steps:

1. Turn off the engine and wait for a few minutes.
2. Restart the car and let it run for a few minutes.
3. Shut off the engine again and wait.
4. Restart the car to check if the check engine light has been reset.

Using Obd-ii Scanner

If the check engine light persists after restarting, you can use an OBD-II scanner to reset it. Here’s how to do it:

1. Locate the OBD-II port in your vehicle, usually found under the dashboard.
2. Plug in the OBD-II scanner and turn on the ignition without starting the engine.
3. Follow the scanner’s instructions to navigate to the reset function and clear the error codes.
4. Once the codes are cleared, turn off the ignition and disconnect the scanner.

Credit: exploreride.com

Professional Service For Check Engine Light Reset

Importance Of Professional Help

In the world of automotive diagnostics, the check engine light can be a cryptic indicator of potential issues. Seeking professional help for a check engine light reset ensures accurate diagnosis and timely resolution.

Diagnostic Tools And Techniques

Professionals utilize advanced diagnostic tools and techniques to pinpoint the exact cause of the check engine light. Their expertise ensures effective troubleshooting and precise resolution of the underlying problem.

Conclusion And Final Tips

To reset the check engine light on your 2018 Jeep Grand Cherokee, you can try restarting the car three times by turning the ignition on and off. Alternatively, you can visit a CDJR service center or a dealership for assistance in resetting the light.

When To Seek Professional Help

If the check engine light continues to come back after multiple reset attempts, it is advisable to seek professional help.

Maintenance Tips To Avoid Recurring Issues

Regularly servicing your Jeep Grand Cherokee and following the manufacturer’s maintenance schedule can help prevent recurring check engine light issues.

Credit: www.amazon.com

Frequently Asked Questions For 2018 Jeep Grand Cherokee Check Engine Light Reset

Can I Reset Check Engine Light Myself?

Yes, you can reset the check engine light yourself. Simply turn the car ignition on and off three times in a row. This should reset the check engine light without the need to disconnect the battery.

What Does The Check Engine Light Mean On A 2018 Jeep Grand Cherokee?

The check engine light on a 2018 Jeep Grand Cherokee indicates potential engine or emissions system issues. It’s important to have the car’s diagnostic code read and get a proper diagnosis. The light may reset itself once the underlying issue is resolved.

Will Jeep Check Engine Light Reset Itself?

The Jeep check engine light will reset itself once the underlying issue is fixed or resolved.

Can You Reset Check Engine Light Without Disconnecting Battery?

You can reset the check engine light by turning the car ignition on and off three times.

Conclusion

In a nutshell, resetting the check engine light on your 2018 Jeep Grand Cherokee is a simple process that allows you to clear error codes and identify any ongoing issues. Following the manufacturer’s guidelines and using the appropriate tools can help you perform this task smoothly.

Remember to consult a professional mechanic if you encounter persistent issues.